-40%
3.4oz Car Anti-Rust Chassis Rust Remover Water-Based Primer Metal Rust Remover
$ 5.85
- Description
- Size Guide
Description
The more you buy,the Cheaper you get !!100ml Car Anti-Rust Chassis Rust Converter Water-Based Primer Metal Rust Remover
9.86 USD
Free shipping
2Pack Car Anti-Rust Chassis Rust Converter Water-Based Metal Rust Remover 100ml
15.03 USD
1.99 USD
100ml Water-Based Car Anti-Rust Chassis Rust Converter Primer Metal Rust Remover
8.08 USD
1.99 USD
2Pack Car Rust Remover Derusting Spray Rust Inhibitor Maintenance Cleaning Tool
10.17 USD
Free shipping
2Pcs Car Clay Bar Mitt Microfiber Auto Cleaning Wash Glove Detailing Polishing
16.21 USD
1.59 USD
30/120ml Car Rust Remover Auto Exhaust Pipe Cleaner Metal Surface Rust Cleaner
8.77 USD
Free shipping
Multi-Purpose Stud Hub Rust Removal Tool W/2 Sanding Disc Hardware Rust Remover
19.65 USD
Free shipping
5Pack Car Anti-Rust Chassis Rust Converter Water-Based Metal Surface Rust Remove
37.99 USD
Free shipping
Features:
*1. CONVERTS EXISTING RUST: Chassis Rust Converter replaces existing rust with a dark and protective polymeric barrier. It transforms rust into an inert coating, sealing out moisture and preventing future rust and corrosion.
*2. PROTECTS IRON AND METAL SURFACES: It revives and protects iron and metal surfaces on automobiles, dumpsters, equipment, railings, etc.
*3. PREVENTS FUTURE CORROSION: This rust treatment prevents future corrosion by locking out moisture from rain and snow. Dries in 20 minutes.
*4. NON-TOXIC, FUME-LESS FORMULA: It is a non-flammable, low VOC, water-based treatment. It is non-toxic and emits no harmful fumes.
*5. NO MORE SCRAPING, SANDBLASTING OR GRINDING: Creare a barrier that’s weather-proof and ready for a fresh coat of paint for your car's chassis. This Chassis Rust Converter will provides more than twice the rust protection.
How to Use:
*1. Surface preparation: Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, dust, and grease.
*2. Application: Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint.
*3. Clean-up: Application equipment should be cleaned immediately with soap and water.
*4. General: Do not apply this product if the surface temperatures are below 50°F. Store in a cool, dry place, protected from freezing or temperatures above 100°F. For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.
Description:
*1. Material: Water-based primer
*2. Net Content: 100ml
Package Includes:
1 x Chassis Rust Converter
1 x Brush
On Mar-04-22 at 01:59:41 PST, seller added the following information: