KBS Top Coater Aerosol Spray Can in 12 or 16 Ounce Cans - Choose Size & Color

Description

KBS
Top Coater - High Solids Topcoat Paint
Maximum Coverage and Professional Looking Results!
KBS Top Coater is a superior spray paint formulated for maximum coverage and professional looking results. KBS Top Coater is an ideal top coat paint for RustSeal when the area will be consistently exposed to sunlight.
KBS Top Coater is a very high solids paint that does not run or sag, and gives at least twice the coverage of conventional spray paints. KBS Top Coater can be applied to bare metal, but for ultimate performance, apply KBS Top Coater over RustSeal.
KBS Top Coater Features
Rock Hard Yet Flexible Coating
Excellent Adhesion to Paints and Primers
Professional Fan Pattern Sprayhead
High Solids Formulation Provides Excellent Hiding Qualities
Does Not Fade
Does Not Run or Sag
Twice The Coverage of Conventional Spray Paints
Chemical Resistant
Outstanding Adhesion
Fast Drying
Excellent Durability
High Temperature Resistance: Withstands Up To 300°F
KBS Top Coater Applications
Cars • Motorcycles • Wheels • Bicycles • Commercial Vehicles • Snow Plows • Fleet and Municipal Vehicles • Tractors • Agricultural Equipment • Construction Machinery • Trains • Boats & Yachts • Personal Watercraft • Woodwork • Tools • Doors • Aerospace
KBS Top Coater Coverage
16oz can of KBS Top Coater should coat up to 38 sq. ft. with 1 coat coverage.
12oz can of KBS Top Coater should coat up to 30 sq. ft. with 1 coat coverage.
Material losses during mixing and application will vary and must be taken into consideration. Expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.
KBS Top Coater Directions
To achieve expert results, please take the time to carefully read and understand the following directions before you begin your restoration project. These directions are meant to be general guidelines only and do not cover every application or environmental situation. If you have remaining questions or concerns, please call us at 219-263-0073 for technical assistance.
ALWAYS WEAR PROTECTIVE GLOVES AND SAFETY GLASSES. ALWAYS WORK IN A WELL-VENTILATED AREA. Please heed all labeled warning and caution notices on all products.
Product Description:
KBS Top Coater is a superior spray paint formulated for maximum coverage and professional looking results. KBS Top Coater is an ideal top coat paint for RustSeal when the area will be consistently exposed to sunlight.
KBS Top Coater is a very high solids paint that does not run or sag, and gives at least twice the coverage of conventional spray paints. KBS Top Coater can be applied to bare metal, but for ultimate performance, apply KBS Top Coater over RustSeal.
Theoretical Coverage:
KBS Top Coater 16 oz Aerosol should coat up to 38 sq. ft. with 1 coat coverage.
KBS Top Coater 12 oz Aerosol should coat up to 30 sq. ft. with 1 coat coverage.
Surface Prep:
FOR THE BEST END RESULTS, apply KBS Top Coater to clean and dry surfaces that have been sealed with RustSeal. If needed, use KBS Klean to remove all surface contaminants. (Avoid solvent-based cleaners which leave invisible residues that can affect the adhesion of KBS Top Coater.)
To topcoat freshly painted RustSeal surfaces (between 3 and 8 hours old), apply KBS Top Coater directly as no other prep is required. For all other applications, lightly sand/scuff with 320 grit paper then clean and dry surface before applying KBS Top Coater.
Spray Application:
For best results, Apply KBS Top Coater to prepared surfaces as described above. ALWAYS WEAR PROTECTIVE GLOVES AND EYEWEAR when using KBS Top Coater. Always use NIOSH/MSHA approved air supplied respirator.
For best results, spray at room temperature 50° to 90°F (10° to 32°C). Use only in moderate to dry atmospheric conditions (i.e. 70% humidity or lower). Shake can for at least one minute after listening for rattle or mixing ball. During application, shake intermittently for approximately 10 seconds at 1 to 2 minute intervals.
Press valve all the way down. Do not extend finger beyond the valve. Hold container about 8 to 10 inches from surface to be sprayed. Do not cover with continuous spray. Move back and forth, releasing sprayhead after stroke. Overlap each stroke. If clogging develops, turn sprayhead 1/4 turn or remove and clean sprayhead. Do not stick pin or other objects in to can opening. With sprayhead pointed away from you, reinsert sprayhead with gentle twisting motion.
IMPORTANT: Apply thin coats rather than heavy coats. If paint runs or sags, paint is being applied too heavily or paint can is too close to surface. Apply one or two thin covering coats for general automotive applications. For marine or industrial applications, apply a minimum of 2 - 3 thin covering coats. Recoating can be done once first or consecutive coat is dry-to-touch. For best results, always apply coats consecutively within 24 hours of each coat curing. Average recoat cure times are 1-2 hours depending on humidity levels. Full cure is usually achieved within 24 hours.
To clear sprayhead for future use, turn can upside down and spray for 3 seconds.
Why Buy from Yogi's?
Yogi's, Inc. has been in the business of providing classic car and street rod parts and accessories for over 40 years.
We have over 20,000 parts in stock in our Monticello, Iowa warehouse ready to ship the business day you place your order.
This Item is IN STOCK and will ship the business day you place your order.
This means you get it faster!
This product carries the full manufacturer's warranty.
Shipping
This item ships in the continental USA by ground transport.
We will provide a tracking number when your item ships.
We will combine items to reduce shipping costs when applicable. When purchasing multiple items please use the eBay "Add to Cart” feature so you make just one transaction in order to be eligible for combined shipping.
For international shipping we use the eBay Global Shipping Program only. This program, and multiple items purchased in a single transaction using the cart feature is the only way we can combine international shipping.
Attention California Residents:
WARNING:
This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.