Noyes MLP 5-2 Multimode Light Pack MLP5-02-0908PR

Description

In working condition, and comes with the original plastic carry case.
MLP 5-2 multimode test kit with Wave ID and data storage  The MLP 5-2 test kit combines the OPM 5-2D optical power meter and OLS 1-Dual LED light source and is ideally suited for testing multimode fiber optic networks. The OLS 1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned. The OPM 5-2D offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1-Dual light source. The OPM 5-2D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory. Using the supplied Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, analysis, and printing. In addition to being powered by two AA alkaline, the OPM 5-2D or OLS 1-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 5-2D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 5-2D and OLS 1-Dual are fully N.I.S.T. traceable.  Features • Rugged, handheld, lightweight • Designed for field use • Certify multimode fiber links per TIA/EIA standards • Wave ID - automatic wavelength identification and switching • Dual Wave ID, single Wave ID, and CW • Large LCD with Backlight • Power measurements in dBm or µW; insertion loss in dB • Reference power level storage • Up to 500 test records per wavelength storage and download • USB port for download of stored records • AA alkaline, optional rechargeable NiMH battery pack or AC adapter • Low battery indicator • Free Windows® compatible software to view, print, and archive test records • Free 50 µm and 62.5 µm mandrels • Cost-effective, easy to use • N.I.S.T traceable continued on the next page Ordering Information Model Includes MLP 5-2 OLS 1-Dual optical light source, OPM5-2D optical power meter, AA batteries, protective rubber boots, adapter cap, USB cable, Windows® compatible software and user's guide, 50 and 62.5 µm mandrels, user's guide, and carry case. Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles and fiber types and adapter caps for most common connectors may be purchased from AFL Telecommunications. Noyes MLP 5-2 Specs Provided by www.AAATesters.com 2 T e s t & I n s p e c t i o n © 2002, AFL Telecommunications, all rights reserved. MLP5-30-2000 Revision A, 6.28.05 Specifications are subject to change without notice. OLS 1-Dual specifications Optical OLS 1-Dual (single port) Output wavelength 850 ±30 nm 1300 +50/-10 nm Spectral width (typ) (FWHM) 40 nm 120 nm Output power >-20 dBm* Fiber size 62.5 µm** Output connector SC (FC & ST available) Emitter classification Class 1 (IEC 60825 - 1) Stability ± 0.1 dB over 8 hours (after 5 min. warm-up) General Power 2 x AA batteries, optional NiMH or AC adapter Battery life (2 x AA) Typical 30 hours Minimum 20 hours Operating temperature -10 to 50°C, 90% RH (non-condensing) Storage temperature -30 to 60°C, 90% RH (non-condensing) Size (H x W x D) 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm) Weight 0.65 lb (.29 kg) * Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper. ** May be used to test 50 or 62.5 µm fiber with supplied mandrels. All specifications at 25°C OPM 5-2D specifications Optical OPM 5-2D Calibrated wavelengths 850, 1300, 1310,1550 nm Detector type Germanium (Ge) Measurement range +6 to -60 dBm Tone detect range +6 to -50 dBm +6 to -45 dBm for 850nm Wavelength ID range () +6 to -50 dBm +6 to -45 for 850nm Accuracy* ± 0.25 dB Resolution 0.01 dB Measurement units dB, dBm, µW General Power 2 x AA batteries, optional NiMH or AC adapter Battery life (2 x AA) 300 hours with backlight [Off] 20 hours with backlight [On] Operating temperature -10 to 50°C, 90% RH (non-condensing) Storage temperature -30 to 60°C, 90% RH (non-condensing) Size (H x W x D) 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm) Weight 0.58 lb (0.26 kg)