Welding World High Flotation Twin Outboard Bracket 13° Transom, 32.25" Setback

Description

ABOUT THIS OUTBOARD ENGINGE BRACKET
Maximum design power for twin outboard engines: 2 x 450 HP.
If an outboard engine bracket is the ultimate add-on for most outboard-equipped boats, this particular one will up the ante in almost all respects. You will not only benefit from a substantial increment in speed and fuel range without having to replace your existing twin outboard engines but you’ll also get away with repowering with much powerful ones, and potentially heavier, if you choose to.
Your stance at rest will be at a flatter angle as the extra flotation volume, applied just at the right spot for maximum leverage, could help compensate for the extra weight of the bigger engines, but more than that you will indeed gain a flatter running angle, mostly due to the generous setback of this bracket. With that you will gain a more efficiently running hull and a considerably drier cockpit.
You will benefit from also having an overall better handling boat and one that can shoot out of the hole usually in half the time it used to take with the old engine placement. It will also make your boat safer offering a way lower platform from which to push yourself up to the deck when in the water as well as the ideal place where to affix an available as an option swim ladder.
Our fabricators have been putting together engine brackets almost since they become a thing in deep-V offshore racing boats, whose roots can be followed back to our base in sunny Miami, arguably the US cradle of the class. We learned the ropes at the elbow of the greats back when Thunder Alley (NE 188th St.) was a barren expanse and there were only three large warehouses where the fastest and meanest boats in the world were hand-built. And we have maintained, through different corporate iterations, an uninterrupted presence in the Southern Florida boating scene ever since.
And there’s nothing small-time about our outboard engine bracket products as our stuff is sold as OEM to most of all Greater Miami-based boat manufacturers and some of the biggest in upstate Florida, and we have type certifications from the NMMA, and the ABYC.
All of our outboard engine brackets are 100% proudly manufactured in the USA, by Americans, with locally sourced materials and components. Make America great by
BUYING
from American craftsmen!
PRODUCT HIGHLIGHTS
All-aluminum construction using 0.375” (transom and engine plates) and 0.250” (rest of the structure) thick cold-formed Alcoa 5052 H32 series sheets and schedule 40 6061-T6 series aluminum tubing for our optional wrap-around handle bar.
124 gallons of added flotation volume in the deep-vee-shaped airbox for added dynamic stability.
Thick, high mil powder coating for the ultimate in marine environment protection.
Awlgrip Sandtex textured, anti-slip treatment to the platform's top surface to ensure perfect traction, safety and durability when wet.
Two-twist-off, wide 8-inch easy access marine spec hatch.
Two-Standard 2 x 3.75 inch saltwater specific sacrificial anodes (zincs).
Includes all mounting aluminum backing plates, SS screws and SS nuts.
WARRANTY
3 year limited warranty.
Welding World, Inc. warranties our outboard engine brackets to be free from structural defects in materials and workmanship for a period of three (3) years from the date of sale, provided that the application of the brackets is for pleasure use only and not for competition, commercial, military, or other uses which could subject the brackets to extraordinary stress, wear or tear.
All approved warranty work is to be F.O.B. at the current Welding World, Inc's. factory location and is subject to repair or replacement at Welding World, Inc's sole and exclusive option.
The original purchaser must previously give written and photographic notice of any defect to Welding World, Inc. during the warranty period, show proof of purchase of the Product, and wait for the approval to the claim from Welding World, Inc. Return of the bracket to the original purchaser shall be at their sole expense.
In no event will Welding World, Inc. be liable to the original purchaser for any damage arising from their use of the bracket, including, without limitation, incidental and consequential damages.
The original purchaser’s sole and exclusive remedy for any claim arising from a defect in the bracket shall be pursuant to the terms and conditions of this warranty.
RETURNS
No free returns on this item.
If the buyer decides to initiate a return without prior communication and the acceptance of Welding World, Inc. we will deduct a 20% restocking fee. In special cases, such as in shipping damage or a valid warranty claim, and always under our exclusive discretion, return costs could be waived or shared. Please contact us first if you have any concerns about your purchase.
SHIPPING
This product listing is offered with
FREE SHIPPING
to the contiguous 48 US states only.
Due to its volume and weight restrictions we currently use UPS Freight as our preferred shipping method which has the following important caveat:
We can only ship directly to commercial addresses.
If you only have available a residential address we can still ship your item. UPS will contact you with the phone information you provide in your order to direct you to their nearest office so you can pick it up at your earliest convinience.
Welding World, Inc. reserves the right to change shipping methods or carriers without notice.
ABOUT US
Welding World, Inc. has been delivering complete customer satisfaction, in all of our products, since 1999. Thousands of happy customers attest to our unequaled legacy of craftsmanship and value excellence. We are fully endorsed members and have current type certifications from the ABYC and the NMMA, and all of our products comply with all federal code and USCG safety guidelines.
Copyright © 2021 Welding World, Inc.